1/9 1. scope of application these specifications are applied to the chip type led lamp , model CL-L102-C3N 2. part code c l - l 1 0 2 - c 3 n series l102 : white power led for general lighting. watt class c3 : 3 watt pakage. lighting color n : white color rank n. approved checked drawn symbol 2007.9.5 mark date ref.ce-p198 09/07 CL-L102-C3N description appro. new implementation name drawing no specifications citizen electronics co.,ltd.
2/9 3. outline drawing 4. performance ( 1 ) absolute maximum rating symbol unit power dissipation pd w forward current i f ma forward pulse current i fp ma *1 reverse voltage v r v operating temperature t op storage temperature t st junction temperature tj max *2 *1forward current : duty<=1/10 , pulse width<=10msec *2 d.c. current : tj = tc + rj-c * pd pulse current : tj = tc + rj-c * pw(power dissipation / one-pulse) * duty approved checked drawn symbol 2007.9.5 mark date ref.ce-p198 09/07 CL-L102-C3N description appro. citizen electronics co.,ltd. new implementation drawing no 800 15 -20 +85 120 -30 +100 parameter rating value 6 500 specifications name tc measuring-point(board side) board anode cathod e unit : mm tolerances unless otherwise specified : 0.3 anode mark
3/9 ( 2 ) electro-optical characteristics ( tc=25 ) symbol condition min typ max unit v f i f =350ma 9.0 10.4 12.0 v i r v r =15v - - 100 a rj-c junction-case - 6.0 - /w v i f =350ma 170 245 - lm chromaticity coordinates ( condition : i f =350ma ,tc=25 ) x y x y 0.331 0.358 0.347 0.373 0.331 0.373 0.348 0.387 0.348 0.387 0.367 0.402 0.347 0.373 0.364 0.388 0.331 0.358 0.347 0.373 x y x y 0.331 0.338 0.345 0.351 0.331 0.358 0.347 0.373 0.347 0.373 0.364 0.388 0.345 0.351 0.360 0.363 0.331 0.338 0.345 0.351 x y x y 0.331 0.322 0.343 0.331 0.331 0.338 0.345 0.351 0.345 0.351 0.360 0.363 0.343 0.331 0.357 0.341 0.331 0.322 0.343 0.331 note 1) the tolerance of measurement at our tester is vf3% , v10% , chromaticity(x,y)0.01. note 2) for handling ,please apply cmos lsi or equivalent any electrostatic effect. approved checked drawn symbol 2007.9.5 mark date ref.ce-p198 09/07 nr4 color rank parameter forward voltage color rank nr2 drawing no name color rank specifications nr5 nr1 color rank nr3 color rank reverse current thermal resistance luminous flux color rank CL-L102-C3N nr6 new implementation description appro. citizen electronics co.,ltd. nr5 nr4 nr3 nr2 nr1 nr6 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 x y
4/9 5. characteristics forward current vs. relative luminous flux forward current vs. forward voltage forward current vs. chromaticity coordinate case temperature vs. chromaticity coordinate approved checked drawn symbol 2007.9.5 mark date ref.ce-p198 09/07 specifications name CL-L102-C3N new implementation drawing no description appro. citizen electronics co.,ltd. 0% 20% 40% 60% 80% 100% 120% 140% 0 100 200 300 400 500 600 if[ma] [ a . u ] -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 100 200 300 400 500 600 if[ma] S , S y S S -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0 20 40 60 80 100 120 tc[ ] S , S y S S 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 100 200 300 400 500 600 if[ma] v f [ v ]
5/9 case temperature vs. forward voltage case temperature vs. relative luminous flux case temperature vs. allowable forward current spectrum approved checked drawn symbol 2007.9.5 mark date ref.ce-p198 09/07 specifications description appro. citizen electronics co.,ltd. CL-L102-C3N drawing no new implementation name 0% 20% 40% 60% 80% 100% 120% 0 20 40 60 80 100 120 tc[ ] [ a . u ] 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 0 20 40 60 80 100 120 tc[ ] v f [ v ] 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% 380 480 580 680 780 d [nm] [ a u . ] 0 100 200 300 400 500 600 -20 0 20 40 60 80 100 120 tc[ ] a l l o w a b l e f o r w a r d c u r r e n t [ m a ] 84 300
6/9 6. reliability (1) details of the tests (2) judgment criteria of failure for reliability test (tc=25c) measuring item symbol forward voltage vf total luminous flux fv u defines the upper limit of the specified characteristics. s defines the initial value. approved checked drawn symbol 2007.9.5 mark date ref.ce-p198 09/07 new implementation drawing no name CL-L102-C3N test item test condition specifications high temperature storage test 100 c 1000 hours continuous operation test moisture-proof test 60 c, 90 %rh for 1000 hours ta=80c, if=350 ma (tj=120c)1000 hours(with al-fin) low temperature storage test -30 c 1000 hours -30c 30 minutes C 100c 30 minutes, 100- cycle measuring condition judgment criteria for failure > u 1.1 < s 0.7 note: measurement shall be taken between 2 hours and 24 hours, and the test pieces should be returned to the normal ambient conditions after the completion of each test. ta=-20c, if=350 ma (tj=20c) 1000 hours(with al-fin) ta=60c, if=350 ma (tj=100c)1000 hours(with al-fin) description appro. citizen electronics co.,ltd. if=350ma if=350ma thermal shock test
7/9 7. packing specifications (1) primary packing an empty tray is placed on top of a four-tier tray which contain 50 pieces each. the set of five trays is banded together by wrapping two rubber bands around it and then sealed in a plastic bag. (smallest packing unit: 200 pieces) an indication label which specifies product name, quantity, lot number and shipment date is attached to the outside of the plastic bag. tray (dimensions: 310 200 11mm / materials: electrically conductive ps) (2) second packing a set of five trays is placed in a box of up to five sets. (dimensions of box: 315mm215mm213mm, maximum of 1000 pieces per box) the same indication label used for the primary packing is attached to the box. if needed, a card board box is also used for shipment. approved checked drawn symbol 2007.9.5 mark date ref.ce-p198 09/07 name CL-L102-C3N new implementation drawing no description appro. citizen electronics co.,ltd. specifications < packing figure > product 50pcs/tray plastic bag indication label indication box 1. type e.g. CL-L102-C3N 2. p.no. (cutomer's p/n) e.g. xxx 3. lot no. e.g. 73d001 - first letter: last digit of the year e.g. 7 year 2007 - second letter: production month e.g. 3 march note: october, november and december are designated by x, y and z, respectively. - third letter: ce's control number e.g. d001 4. quantity e.g. 200 pieces example of indication label CL-L102-C3N ?? 200 ??? 73d001 ??? ???
8/9 precautions 1. avoid the application of any stress to the lens portion. 2. avoid any contact by a sharp metal nail or other materials with the lens portion. 3. this product should be secured firmly by fastening an m3 screw on both sides of the product. please be careful not to apply any stress to the product during the clamping operation. please check thoroughly. < recommended installation screw pitch: 46.5 mm > 4. a heat radiating grease should be applied to the whole rear surface so that this product can dissipate heat as a whole. this product could be bent during the clamping operation if heat grease in sheet form is used. for this reason, it is recommended that grease 5. handling of static electricity of a wristband or anti-static gloves when handling this product. - as for damages due to static electricity, please check them by lighting inspection. ce's lighting inspection criterion in assembled status. approved checked drawn symbol 2007.9.5 mark date ref.ce-p198 09/07 drawing no name CL-L102-C3N new implementation as the connection status could vary depending on materials of outer heat sink, judgmental criterion - please take measures to prevent any static electricity being produced such as the wearing 6. please be aware that this product should not come into contact with any other parts specifications in paste form is used. no-lighting should not exist. description appro. citizen electronics co.,ltd. condition if=1ma or less lens portion (shaded area) 46.5 mm thermal conductive silicone grease outer heat sink spring washer (=< 6mm) m3 screw plane washer (=< 6mm)
9/9 precautions (continued) 8. heat generation a heat release design is required to use this product efficiently. please ensure that heat generation is not in excess of the absolute maximum rating. (refer to 4-1 performance) 9. recommended soldering of 40w or lower. the temperature of a soldering iron should be adjusted 350c or lower. - no external force is applied to sealing resin during soldering operation. - please do not handle a product until it returns to a normal temperature. note: this product is not adaptable to reflow process. 10. other - this product complies with rohs directives. office automation equipment, communication devices, audio-video equipment, home electrical appliances, measurementhardware and others). in cases where this product is used for the applications that requires high reliability or could directly affect human life or health due to failure or malfunction (aerospace hardware, medical equipment, atomic control equipment and others), please consult with our sales representatives beforehand. -an agreement of formal product specifications is required prior to mass production. - the specifications and appearance of this product are subject to change without advanced notice. approved checked drawn symbol 2007.9.5 mark date ref.ce-p198 09/07 ambient temperature conditions or power dissipation. thus, drive conditions should be - please design a circuit that prevents any reverse voltage (excess current) from being applied to this product instentaneously when the circuit is on or off. - a constant current circuit is recommended as a drive circuit. specifications - as this product is designed with consideration of the heat release property of module, - factors responsible for an increase in temperature include heat generation attributed to 7.drive circuit and when two or more led packages are connected, the series connection between each package is recommended. new implementation description appro. citizen electronics co.,ltd. name CL-L102-C3N drawing no fabrication such as changes in shape. taken into consideration, depending on ambient temperature (ta). - soldering operation should be performed within 3.5 seconds per land using a soldering iron - this product is intended for the application in general electronic devices (such as - our warranty does not cover situations where this product undergoes secondary
|
